Scrap Metal Recycling Equipment
Shredding, crushing, granulating, screening and sorting machines for yards, recycling plants and metal processors. Every unit is configured around your input material and target output size.
In this range
Copper Wire Granulator
Dry-type granulator that turns mixed insulated cable into clean copper granules, from a 220 V workshop unit to a 600 kg/h production machine.
Industrial Metal Shredder
Single-, dual- and four-shaft shredders that reduce bulky metal scrap to a consistent 50–300 mm output, with anti-jam reversal and hardened blade sets.
Eddy Current Separator
High-frequency rotor that ejects aluminium, copper and zinc from mixed streams, separating particles down to 3 mm at >99% aluminium recovery.
Hydraulic Gantry Shear
800-ton shearing force and a 1,600 mm blade for thick plate, H-beams and rail — clean shear faces with a 12–18 second cycle.
GTS Series Trommel Screen
Rotary drum screener that splits shredded scrap into size fractions before sorting, reducing downstream wear and improving separation accuracy.
Vertical Crusher
Vertical shaft crusher for reducing crushed scrap and motor housings to a uniform, denser output before separation or baling.
Heavy Duty Scrap Steel Shredder
High-capacity hammer mill shredder for heavy-duty scrap steel processing.
Scrap Aluminum Crusher
Crusher for reducing aluminum profiles, castings and mixed aluminum scrap.
Aluminum Profile Crusher
Higher-power crusher for large-volume or heavy-gauge aluminum profiles and extrusions.
Small Aluminum Can Crusher
Compact crusher for used beverage cans, aluminum tins and foil products.
Metal Chips & Swarf Crusher
Crusher for turning tangled metal turnings and swarf into a more uniform feed.
UBC Aluminum Can Shredder
High-volume system for processing baled or loose used beverage cans.
Electric Motor Rotor & Stator Crusher
Specialized crusher for liberating copper and aluminum windings from electric motor cores.
Dual Shaft Shredder
High-power dual-shaft shredder for bulky or difficult secondary aluminum feed.
Single Shaft Shredder
Single-shaft shredder with hydraulic pusher and screen-controlled output.
Four Shaft Shredder
Four-shaft shredder for consistent size reduction at low speed.
All equipment
16 machines in this range, plus the melting, casting and cooling equipment that usually follows them in a line.
View detailsWhat we need from you to quote accurately
Describe the material, target output and throughput. We will recommend the process stages before quoting.
- Input materialDescribe the material entering the line, including cable, UBC bales, housings, plate, profiles and contamination.
- ThroughputState the feed throughput in tonnes per hour; shift pattern and duty cycle affect motor and wear-part selection.
- Target outputSpecify the output size, purity and buyer acceptance standard for the mill, refinery or trader.
- Site constraintsShare footprint, ceiling height, power supply and whether the line runs indoors.
Complete lines using this range
Scrap Aluminium Recycling Line
Shred, crush and separate mixed aluminium scrap into a clean furnace-ready fraction, with ferrous and non-ferrous streams split out along the way.
ProcessSolutionsScrap Steel Crushing & Sorting Line
Reduce heavy steel scrap to a dense, uniform furnace charge while separating non-ferrous contamination out of the stream.
ProcessSolutionsScrap Cable & Wire Recycling Line
Recover saleable copper granules from mixed and thin cable that manual stripping cannot handle economically. A heavy-duty configuration is available; throughput is confirmed against cable type and a material test.
ProcessSolutionsWaste Appliance Crushing & Recycling
Dismantle and crush end-of-life appliances, then split out ferrous, non-ferrous and plastic fractions for separate sale.
ProcessNeed a line matched to your material?
Describe the material, target output and throughput. We will recommend the process stages before quoting.