Scrap metal recycling and melting equipment
Every machine below is built to order. Blade profiles, rotor speeds, screen apertures, belt widths and motor sizes are selected against your input material — which is why the specification conversations start with what you are processing, not with a model number.
Scrap Metal Recycling Equipment
Shredding, crushing, granulating, screening and sorting machines for yards, recycling plants and metal processors. Every unit is configured around your input material and target output size.
Copper Wire Granulator
Dry-type granulator that turns mixed insulated cable into clean copper granules, from a 220 V workshop unit to a 600 kg/h production machine.
Industrial Metal Shredder
Single-, dual- and four-shaft shredders that reduce bulky metal scrap to a consistent 50–300 mm output, with anti-jam reversal and hardened blade sets.
Eddy Current Separator
High-frequency rotor that ejects aluminium, copper and zinc from mixed streams, separating particles down to 3 mm at >99% aluminium recovery.
Hydraulic Gantry Shear
800-ton shearing force and a 1,600 mm blade for thick plate, H-beams and rail — clean shear faces with a 12–18 second cycle.
GTS Series Trommel Screen
Rotary drum screener that splits shredded scrap into size fractions before sorting, reducing downstream wear and improving separation accuracy.
Vertical Crusher
Vertical shaft crusher for reducing crushed scrap and motor housings to a uniform, denser output before separation or baling.
Heavy Duty Scrap Steel Shredder
High-capacity hammer mill shredder for heavy-duty scrap steel processing.
Scrap Aluminum Crusher
Crusher for reducing aluminum profiles, castings and mixed aluminum scrap.
Aluminum Profile Crusher
Higher-power crusher for large-volume or heavy-gauge aluminum profiles and extrusions.
Small Aluminum Can Crusher
Compact crusher for used beverage cans, aluminum tins and foil products.
Metal Chips & Swarf Crusher
Crusher for turning tangled metal turnings and swarf into a more uniform feed.
UBC Aluminum Can Shredder
High-volume system for processing baled or loose used beverage cans.
Electric Motor Rotor & Stator Crusher
Specialized crusher for liberating copper and aluminum windings from electric motor cores.
Dual Shaft Shredder
High-power dual-shaft shredder for bulky or difficult secondary aluminum feed.
Single Shaft Shredder
Single-shaft shredder with hydraulic pusher and screen-controlled output.
Four Shaft Shredder
Four-shaft shredder for consistent size reduction at low speed.
All 16 recycling machines
Filtered by stage in the line — shredding, separation, shearing, melting or casting. Every unit is configured to your material and throughput.
Open the recycling rangeScrap Metal Melting & Casting Equipment
Induction melting furnaces and continuous casting equipment that turn sorted scrap into ingots, billets and rod. Furnace size, power supply and casting rate are specified together, because the casting rate has to match the melt.
Medium Frequency Induction Melting Furnace
Medium frequency induction melting furnaces in two size classes: 1–10 kg crucible units for gold and silver, and a 50 kW furnace melting 70–100 kg of aluminium per heat.
Continuous Casting & Rolling Line
Turn molten aluminium or copper into ingots, billets and rod with a continuous casting line matched to your melting capacity.
Induction Aluminum Melting Furnace
Induction furnace for melting aluminum ingots, scrap, profiles and alloys.
Induction Steel Melting Furnace
Medium-frequency induction furnace designed for scrap steel melting.
Stainless Steel Induction Melting Furnace
Medium-frequency induction furnace for stainless steel melting.
Small Medium Frequency Induction Furnace
Compact medium-frequency induction furnace for efficient small-batch melting.
Medium Frequency Gold Melting Furnace
Medium-frequency induction furnace specially designed for gold melting.
Forging Induction Heating Furnace
Medium-frequency induction heating furnace for rapid heating before forging.
Induction Drying Furnace
Induction drying furnace for uniform and rapid drying and dehumidification.
Billet Heating Furnace
Industrial furnace for heating steel billets and metal ingots.
Closed Water Cooling Tower
Closed-loop water cooling tower with fully enclosed circulating water.
Open Water Cooling Tower
Open evaporative water cooling tower for industrial circulating water.
Continuous Casting Machine
Continuous casting equipment that converts molten steel into solid billets.
Aluminum & Copper Ingot Casting Line
Continuous casting line for non-ferrous aluminum and copper ingots.
Aluminum Rod Continuous Casting Machine
Horizontal continuous casting equipment for aluminum and aluminum-alloy rod stock.
Mini Rolling Mill Production Line
Compact rolling mill production line for cost-effective metal processing.
All 16 melting machines
Filtered by stage in the line — shredding, separation, shearing, melting or casting. Every unit is configured to your material and throughput.
Open the melting rangeNot sure which machine fits your material?
Describe the material and the tonnage. We will tell you which stage you actually need — and which ones you can skip.