Scrap Metal Melting & Casting Equipment
Induction melting furnaces and continuous casting equipment that turn sorted scrap into ingots, billets and rod. Furnace size, power supply and casting rate are specified together.
In this range
Medium Frequency Induction Melting Furnace
Medium frequency induction melting furnaces in two size classes: 1–10 kg crucible units for gold and silver, and a 50 kW furnace melting 70–100 kg of aluminium per heat.
Continuous Casting & Rolling Line
Turn molten aluminium or copper into ingots, billets and rod with a continuous casting line matched to your melting capacity.
Induction Aluminum Melting Furnace
Induction furnace for melting aluminum ingots, scrap, profiles and alloys.
Induction Steel Melting Furnace
Medium-frequency induction furnace designed for scrap steel melting.
Stainless Steel Induction Melting Furnace
Medium-frequency induction furnace for stainless steel melting.
Small Medium Frequency Induction Furnace
Compact medium-frequency induction furnace for efficient small-batch melting.
Medium Frequency Gold Melting Furnace
Medium-frequency induction furnace specially designed for gold melting.
Forging Induction Heating Furnace
Medium-frequency induction heating furnace for rapid heating before forging.
Induction Drying Furnace
Induction drying furnace for uniform and rapid drying and dehumidification.
Billet Heating Furnace
Industrial furnace for heating steel billets and metal ingots.
Closed Water Cooling Tower
Closed-loop water cooling tower with fully enclosed circulating water.
Open Water Cooling Tower
Open evaporative water cooling tower for industrial circulating water.
Continuous Casting Machine
Continuous casting equipment that converts molten steel into solid billets.
Aluminum & Copper Ingot Casting Line
Continuous casting line for non-ferrous aluminum and copper ingots.
Aluminum Rod Continuous Casting Machine
Horizontal continuous casting equipment for aluminum and aluminum-alloy rod stock.
Mini Rolling Mill Production Line
Compact rolling mill production line for cost-effective metal processing.
All equipment
16 machines in this range, plus the melting, casting and cooling equipment that usually follows them in a line.
View detailsWhat we need from you to quote accurately
Describe the material, target output and throughput. We will recommend the process stages before quoting.
- Input materialDescribe the material entering the line, including cable, UBC bales, housings, plate, profiles and contamination.
- ThroughputState the feed throughput in tonnes per hour; shift pattern and duty cycle affect motor and wear-part selection.
- Target outputSpecify the output size, purity and buyer acceptance standard for the mill, refinery or trader.
- Site constraintsShare footprint, ceiling height, power supply and whether the line runs indoors.
Complete lines using this range
Scrap Aluminium Recycling Line
Shred, crush and separate mixed aluminium scrap into a clean furnace-ready fraction, with ferrous and non-ferrous streams split out along the way.
ProcessSolutionsScrap Steel Crushing & Sorting Line
Reduce heavy steel scrap to a dense, uniform furnace charge while separating non-ferrous contamination out of the stream.
ProcessSolutionsScrap Cable & Wire Recycling Line
Recover saleable copper granules from mixed and thin cable that manual stripping cannot handle economically. A heavy-duty configuration is available; throughput is confirmed against cable type and a material test.
ProcessSolutionsWaste Appliance Crushing & Recycling
Dismantle and crush end-of-life appliances, then split out ferrous, non-ferrous and plastic fractions for separate sale.
ProcessNeed a line matched to your material?
Describe the material, target output and throughput. We will recommend the process stages before quoting.